Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Palm Beach Gardens?
Panel replacement in Palm Beach Gardens typically costs $250-$500 for a residential sectional door, depending on how many panels you’re replacing, whether the sections are insulated, and whether the color or profile is still in production. A single damaged panel on a standard door usually lands at the low end; three or four panels on an insulated, custom-profile door push toward the top. The written estimate you get before work starts sets the final price.
If a panel is bent, dented, or cracked after a hard knock, we can look at it and quote the job. Call (855) 337-1107. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and our technicians have up to 15 years of experience with doors and openers from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Panel Replacement Cost Breakdown (2026)
Here’s how panel work breaks down by scope. These are typical estimated ranges for the Palm Beach Gardens market in 2026, not a fixed price list. Your written estimate is the number that counts.
| Scope of work | Typical estimated range |
|---|---|
| Single panel replacement (standard steel, uninsulated) | $250-$350 |
| Single panel replacement (insulated, matched color/profile) | $320-$500 |
| Two or three panels on the same door | $250-$500 |
| Panels plus hinge/roller replacement while the door is open | $110-$220 (rollers) added to the panel price |
| Panel replacement with track adjustment | $120-$240 (tracks) added to the panel price |
| Full door and panel replacement (all sections) | $700-$2200 |
What pushes the number up? Insulated panels cost more than uninsulated because there’s more material and more manufacturing. A custom color, woodgrain finish, or long-discontinued profile means the panel has to be sourced or the whole door has to change, and that adds cost. Doors with windows in the panel carry a higher panel price than solid sections. What keeps it down? Replacing one panel instead of several, and reusing the existing hardware when it’s still in good shape. If the rollers and hinges are already worn, it usually makes sense to handle those at the same time rather than pay for a second visit.
What Affects Panel Replacement Pricing in Palm Beach Gardens
- Panel material. Steel is the standard and the most economical. Aluminum costs more, and a wood or composite panel on a high-end door costs more again. The material of the panel you’re replacing has to match the rest of the door, so there’s not always a choice.
- Insulation and profile. An insulated panel with a specific profile (raised, flush, carriage-style) costs more than a plain uninsulated one. Palm Beach Gardens homes run the range from older single-car doors to newer oversized and carriage-style doors, and the panel has to match what’s already there.
- Color and availability. If the color is still in production, a panel matches cleanly. If it’s discontinued, a close match or a full-door change may be the realistic route, and that changes the price.
- Number of panels. One panel is one job. Four panels on the same door is a different job, with more material and more labor, and the price reflects that.
- Related wear. If the panel damage came with bent tracks, worn rollers, or a hinge that pulled loose, those parts need attention too. We quote them on the same estimate so there are no surprises later.
- Door age and system type. On an older door with legacy hardware, finding a matching panel can take more work than on a newer door with a current profile. We service both, which is why we keep Clopay, Amarr, Wayne Dalton, and Raynor panels in scope alongside the opener brands.
How to Save on Panel Replacement
The biggest lever is replacing fewer panels. If only the bottom section took the hit, replacing that one section and leaving the rest is almost always cheaper than a full-door change, provided the panel is still available. Ask specifically whether a single-panel repair will do the job.
If your rollers and hinges are on their last legs, bundle them with the panel work. Handling worn rollers at the same time as the panel saves a second visit, and roller replacement runs $110-$220 on its own. Track realignment, at $120-$240, is another job that makes sense to fold in if the door is already apart.
Ask about a color match before you commit. If the panel color is discontinued, the honest answer may be that a close match is the practical route. We’d rather tell you that up front than after the panel arrives.
Get a written estimate and compare line items, not just a total. A free estimate from us covers the panel, any hardware, and the labor in one number. Call (855) 337-1107 to set one up. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
When Panel Replacement Is the Right Call
Replacing a panel beats replacing the whole door whenever the rest of the door is sound. A bent bottom section from a car bump, a dent from a stray ball, or a cracked panel from a hard impact is a panel job. The door’s structure, springs, cables, and opener don’t need to change for that.
A full-door change makes more sense when several panels are damaged, when the door is old enough that matching panels no longer exist, or when the tracks and hardware are worn past the point of repair. That job runs $700-$2200, and the decision usually comes down to whether the cost of panels plus hardware approaches the cost of a new door. We’ll walk you through both numbers before you decide. For a broader look at what repairs cost across the door, see our Palm Beach Gardens Garage Door Repair page.
Repair or Replace: Panel Work vs. a New Door
Panel replacement at $250-$500 is the cheaper route when the damage is cosmetic or limited to one or two sections and the panel is still available. A new door at $700-$2200 is the better call when the door is structurally tired, when the color is discontinued, or when several panels are gone. There’s no rule that fits every door, so the estimate matters. We quote both options rather than steering you toward the bigger job.
Panel replacement is one piece of the picture. If the door also needs panel replacement on more than one section, or if the springs are showing their age, we’ll say so and quote the whole scope in one estimate. For a full door and opener service overview, our main page covers the range of work we handle.
Why Homeowners in Palm Beach Gardens Call Us for Panel Work
We work on your brand. That matters with panels, because a panel has to match the door it’s going into, and we work across Clopay, Amarr, Wayne Dalton, Raynor, and the opener brands that control them. There’s no referral runaround if your door is one of the eight brands we’re certified on: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
We handle the full scope: repairs, opener repair, spring repair, panel work, and full installations. If the panel damage turns out to be part of a bigger problem, we don’t hand you to a different contractor. The same team sees it through.
When a door is stuck open or closed and the panel is only part of the trouble, we’re set up for emergency calls. Broken spring, dead opener, door off its track: those can’t wait for a scheduled visit. Call (855) 337-1107. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Panel Replacement Cost
How much does it cost to replace a garage door panel in Palm Beach Gardens?
A single panel replacement in Palm Beach Gardens typically costs $250-$500, depending on material, insulation, and whether the color and profile are still available. The low end covers a standard steel panel on a door with a current color; the high end covers an insulated or custom-profile panel. Call (855) 337-1107 for an exact quote. Estimates are free.
Is it cheaper to replace one panel or the whole door?
Replacing one panel is almost always cheaper: $250-$500 versus $700-$2200 for a new door. The exception is when the panel is discontinued and no match can be found, or when several panels are damaged. In those cases, the new-door option may be the better value. Call (855) 337-1107 and we’ll price both.
Can you replace a panel the same day?
Same-day panel replacement is possible when the panel is in stock and the color matches, and it’s a straightforward job. If the panel has to be ordered, it usually takes a few days. Call (855) 337-1107. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Does panel replacement cost more if the door is insulated?
Yes, an insulated panel costs more than an uninsulated one, usually landing in the $320-$500 range for a single panel versus $250-$350 for standard steel. The insulation adds material and manufacturing cost. Call (855) 337-1107 for a quote on your door.
What else might I need to pay for when a panel is replaced?
Related wear is the main add-on: rollers at $110-$220, track realignment at $120-$240, or cable work at $130-$250 if the door was knocked off alignment. Springs are separate and run $180-$340 per spring. We quote whatever the door needs in one estimate so the number is clear before work starts. Call (855) 337-1107.
Get a Free Panel Replacement Estimate in Palm Beach Gardens
If a panel on your door is bent, dented, or cracked, we’ll look at it and give you a written estimate. Call (855) 337-1107. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and our technicians have up to 15 years of experience with doors and openers from the major brands. Springs, openers, panels, and full doors: one call handles it. If your panel damage came along with a failed opener or a broken spring, tell us on the call so we can quote the whole job at once. The written estimate is the price, and it’s the same whether you call on a Sunday morning or a Tuesday afternoon.
Pricing reflects the Palm Beach Gardens market as of 2026. Palm Beach Gardens Garage Door Repair offers free estimates – call (855) 337-1107.
Written by the team at Palm Beach Gardens Garage Door Repair.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Priya Rao"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Oscar Castillo"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Hector Reyes